TYVcure 3PL150
シリケート樹脂
TYVcure 3PL150 is a two-component system developed for the rehabilitation of industrial and communal wastewater facilities, water insulation of engineering structures. It produces a thick, high-strength, and chemical-resistant coating on technological structures and is suitable as a matrix material for glass fiber reinforced composites for various applications.
TYVcure 3PL150 resin is made of two liquid components:
| 名称 | 値 | 単位 |
|---|---|---|
| Enclosed space flash point of 'B' component | > 170 | °C |
| Open space flash point of 'B' component | > 200 | °C |
| Volatile organic content (VOC) of 'A' component | 0 | m/m% |
| Volatile organic content (VOC) of 'B' component | 0 | m/m% |
| density of 'A' component | 1.5 ± 0.1 | g/cm3 |
| viscosity of 'A' component | 400 ± 50 | mPas |
| density of 'B' component | 1.2 ± 0.02 | g/cm3 |
| viscosity of 'B' component | 200 ± 50 | mPas |
| 名称 | 値 | 単位 |
|---|---|---|
| Compressive strength | ≥ 40 | MPa |
| Flexural strength | ≥ 20 | MPa |
| Adhesion strength | ≥ 3.2 | MPa |
| Linear shrinkage | ≤ 0.1 | % |
| Abrasion resistance | ≤ 75 | mg |
| Surface water uptake | ≤ 24 | g/m2•day |
